Victron Energy Smart IP43 12V 50A Dual-Output Battery Charger – PSC125051095
MPN No: PSC125051095
Expected ship date Nov 17 - 24
In Stock
$471.75
You will not be able to undo this action.

U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

PSC125051095
MPN No: PSC125051095
Expected ship date Nov 17 - 24
In Stock
$471.75
The Victron Energy Smart IP43 Charger 12/50(1+1) 120–240V, manufacturer part number PSC125051095, is an advanced AC-to-DC battery charger designed for compatible nominal 12V battery systems. Combining a powerful 50A house battery charging output, a separate auxiliary starter battery charging output, built-in Bluetooth Smart connectivity, and Victron Energy's adaptive six-stage charging technology, this charger provides intelligent battery charging for marine, recreational vehicle, off-grid, and backup power applications.
The charger supports a wide range of AC supply conditions, allowing it to operate from compatible utility power, shore power, and generator sources. Its intelligent charging electronics regulate the DC output according to the selected battery charging profile and operating conditions.
Important: The PSC125051095 is an AC-powered battery charger, not a solar MPPT charge controller or inverter. The AC mains cord must be purchased separately. An AC inlet retaining clip is included.
| Specification | Details |
|---|---|
| Manufacturer | Victron Energy |
| Product Name | Smart IP43 Charger 12/50(1+1) 120–240V |
| Manufacturer Part Number | PSC125051095 |
| Product Family | Smart IP43 Charger 120–240V |
| Product Type | Smart AC-to-DC Battery Charger |
| Nominal Battery Voltage | 12V DC |
| Output Configuration | 1 Main Battery Output + 1 Auxiliary Starter Battery Output |
| Number of Battery Connections | 2 |
| AC and DC Input Specifications | |
| AC Input Voltage Range | 85–250V AC |
| Full-Power AC Input Voltage | From 100V AC |
| AC Startup Voltage | From 90V AC |
| AC Input Frequency | 45–65Hz |
| Power Factor | 1 |
| Maximum AC Input Current Setting | 3–10A |
| DC Input Voltage Range | 90–375V DC |
| AC Input Connection | IEC 320 C14 Inlet with Retainer Clip |
| AC Mains Cord | Ordered Separately |
| US AC Mains Cord Plug Option | NEMA 5-15P |
| Battery Charging Output Specifications | |
| Nominal House Battery Voltage | 12V DC |
| Main House Battery Charge Current | 50A Maximum |
| Auxiliary Starter Battery Charge Current | 4A Maximum |
| Auxiliary Output Voltage | Slightly Lower Than Main Output |
| Auxiliary Output Purpose | Starter Battery Top-Up |
| Auxiliary Output Connection | Two-Pole Terminal |
| Low Current Mode | 25A |
| Maximum Efficiency | 94% |
| Back Current Drain | Less Than 1mA |
| No-Load Power Consumption | 1W |
| Default Temperature Compensation | -16mV/°C |
| Automatic DC Cable Voltage Compensation | Yes |
| Charging Voltage Settings | |
| Normal Profile — Absorption Voltage | 14.4V |
| Normal Profile — Float Voltage | 13.8V |
| Normal Profile — Storage Voltage | 13.2V |
| High Profile — Absorption Voltage | 14.7V |
| High Profile — Float Voltage | 13.8V |
| High Profile — Storage Voltage | 13.2V |
| Lithium Profile — Absorption Voltage | 14.2V |
| Lithium Profile — Float Voltage | Not Applicable |
| Lithium Profile — Storage Voltage | 13.5V |
| Programmable Charging Voltage and Current | Yes, via Bluetooth or VE.Direct |
| Charging Algorithm and Battery Management | |
| Lead-Acid Charging Algorithm | Adaptive Six-Stage |
| Charging Stages | Bulk, Absorption, Recondition, Float, Storage, Refresh |
| Lithium Charging Algorithm | Three-Stage |
| BatterySafe Mode | Yes |
| Variable Absorption Time | Yes |
| Storage Mode | Yes |
| Refresh Charging | Yes |
| Preprogrammed Charging Profiles | Normal, High, Lithium |
| Power Supply Mode | Yes, Configurable via Bluetooth or VE.Direct |
| Communication and Control | |
| Built-In Bluetooth Smart | Yes |
| Bluetooth Transmit Power | -4dBm |
| Bluetooth Frequency Range | 2402–2480MHz |
| VictronConnect Compatibility | Yes |
| VE.Direct Interface | Yes |
| VE.Smart Network Synchronized Charging | Yes |
| Optional External Battery Voltage Sensing | Compatible Smart Battery Sense, SmartShunt, or BMV-712 Smart |
| Optional External Battery Temperature Sensing | Compatible Bluetooth Battery Sensing Equipment |
| Remote On/Off | Yes |
| Remote On/Off Connection | Two-Pole Terminal, Remote H and Remote L |
| Programmable Relay | Yes, SPDT |
| Programmable Relay Rating | 5A up to 250V AC / 5A up to 28V DC |
| Electrical Protection | |
| Battery Reverse Polarity Protection | Yes, Internal Fuse; Not User Accessible |
| Output Short-Circuit Protection | Yes |
| Overtemperature Protection | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -20°C to +60°C |
| Rated Charging Current Temperature Limit | Up to 40°C |
| High-Temperature Output Derating | Linearly to 20% of Rated Output at 60°C |
| Maximum Relative Humidity | 95%, Non-Condensing |
| Cooling Method | Natural Convection, Fanless |
| Electronics Protection Rating | IP43 |
| Connection Area Protection Rating | IP22 |
| Mechanical Specifications | |
| Enclosure Material | Aluminum |
| Enclosure Color | Blue, RAL 5012 |
| Main Battery Connection | Screw Terminals |
| Maximum Battery Terminal Cross-Section | 16mm² / AWG6 |
| Auxiliary Battery Connection | Two-Pole Terminal |
| Dimensions (H × W × D) | 7.1 × 9.8 × 4.6 in |
| Weight | 6 lb |
| AC Retainer Clip | Included |
| Standards and Compliance | |
| Safety Standards | EN 60335-1, EN 60335-2-29 |
| Emission Standards | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
| Immunity Standards | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
| Vibration Standard | IEC 68-2-6: 10–150Hz / 1.0G |
Victron Energy manufactures battery charging, power conversion, monitoring, and energy management equipment for marine, mobile, off-grid, industrial, and renewable energy applications.
Its product portfolio includes smart battery chargers, inverter/chargers, standalone inverters, solar charge controllers, DC-DC converters, battery monitors, and integrated energy system components.
Victron products are designed to support flexible electrical system integration, intelligent monitoring, and dependable energy management.
The Victron Energy Smart IP43 Charger 12/50(1+1) 120–240V PSC125051095 combines high-current 12V house battery charging, a dedicated starter battery maintenance output, adaptive charging technology, built-in Bluetooth, VE.Direct communication, and comprehensive protection features.
Designed for compatible marine, RV, off-grid, and backup battery systems, it provides an intelligent AC-powered charging solution for installations that require a primary battery bank and a separate starter battery connection.
US Solar Supplier is an American-founded company based in Kentucky dedicated to offering top-quality solar components from trusted manufacturers. We provide competitive pricing, dependable inventory, and products backed by warranties you can trust.
Our inventory is updated daily with the latest solar technologies, and our experienced team is ready to assist with product selection, system design, and installation guidance.
Have questions before you order? Call 1-800-230-7004 to speak with our knowledgeable support team. We're here to help with product details, compatibility questions, or purchasing support.