HT-SAAE Solar 455W (Pallet of 36) N-Type TOPCon Bifacial Dual-Glass Solar Panel HT54-18X(ND)-F 455W
MPN No: HT54-18X(ND)-F 455W
Expected ship date Nov 26 - Dec 03
In Stock
5,099.99
-19%
$4,099.00
You will not be able to undo this action.

Shipping calculated at checkout. About shipping
Due to its size and weight, this item ships secured on a pallet by freight truck.
The carrier will contact you to schedule delivery.
U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

HT54-18X(ND)-F 455W
MPN No: HT54-18X(ND)-F 455W
Expected ship date Nov 26 - Dec 03
In Stock
5,099.99
-19%
$4,099.00
455W per Panel | 16.38kW DC per Pallet | 22.8% Module Efficiency
Build your solar array with 36 HT-SAAE 455W panels featuring N-type TOPCon cells, a black frame, and bifacial dual-glass construction. Sold by the full pallet.
Inverters, batteries, racking, and other installation equipment are sold separately.
The HT-SAAE MULTIWAY+ 455W panel combines 22.8% module efficiency with N-type TOPCon technology to deliver high output in a residential-friendly format. Each module measures approximately 69.37 × 44.65 inches and uses 108 half-cut monocrystalline cells.
Its black frame and dual-glass construction make it a practical option for rooftops, ground-mounted arrays, and compatible solar carports. Each pallet provides 16.38kW of front-side rated DC capacity for larger home systems and commercial projects.
The bifacial rear surface can capture reflected sunlight for additional production when the mounting arrangement allows light to reach both sides.
The panel’s N-type TOPCon cells and half-cut layout support efficient power conversion while reducing internal electrical losses. Its -0.29%/°C power temperature coefficient describes how output changes as cell temperature rises above standard test conditions.
The module also incorporates resistance to potential-induced degradation, helping support long-term electrical performance when installed and operated within manufacturer requirements.
The 455W nameplate rating measures front-side output under standard test conditions. Reflected sunlight reaching the rear surface can contribute additional production beyond that rating.
Rear-side gains depend on mounting height, shading, row spacing, and the reflectivity of surrounding surfaces. Elevated ground-mounted systems and open canopy structures can provide more rear exposure than panels mounted close to a roof.
The listed bifaciality factor is 80% ±5%. This describes the rear side’s response relative to the front under comparable illumination; it does not mean the panel produces 80% more energy.
Anti-reflective front glass and heat-strengthened rear glass protect the cells on both sides. The module features a black frame, an IP68-rated junction box, and an operating temperature range of -40°F to 185°F.
Listed mechanical load ratings are 5,400Pa on the front and 2,400Pa on the rear. Applicable load capacity depends on the approved mounting configuration and installation instructions.
| Specification | Details |
|---|---|
| Manufacturer | HT-SAAE / HT-SOLAR |
| Product Series | MULTIWAY+ |
| Model | HT54-18X(ND)-F, 455W |
| Rated Power per Panel | 455W at STC |
| Panels per Pallet | 36 |
| Total Rated Power per Pallet | 16,380W / 16.38kW DC at STC |
| Module Efficiency | 22.8% |
| Cell Technology | N-type monocrystalline TOPCon |
| Cell Configuration | 108 half-cut cells, 6 × 18 layout |
| Module Design | Bifacial, dual glass |
| Power Tolerance | 0 to +3% |
| Maximum Power Voltage (Vmp, STC) | 32.8V |
| Maximum Power Current (Imp, STC) | 13.90A |
| Open-Circuit Voltage (Voc, STC) | 39.1V |
| Short-Circuit Current (Isc, STC) | 14.72A |
| Maximum System Voltage | 1,500V DC (IEC), subject to system and installation requirements |
| Maximum Series Fuse Rating | 25A |
| Bifaciality Factor | 80% ±5% |
| Maximum Power at NMOT | 346W |
| Maximum Power Voltage at NMOT | 31.5V |
| Maximum Power Current at NMOT | 10.98A |
| Open-Circuit Voltage at NMOT | 37.5V |
| Short-Circuit Current at NMOT | 11.86A |
| Nominal Module Operating Temperature | 43 ±2°C |
| Power Temperature Coefficient | -0.29%/°C |
| Voc Temperature Coefficient | -0.25%/°C |
| Isc Temperature Coefficient | +0.046%/°C |
| Dimensions per Panel (L × W × H) | 69.37 × 44.65 × 1.18 in |
| Weight per Panel | 55.1 ±1.1 lb |
| Front Glass | Anti-reflective coated glass |
| Rear Glass | Heat-strengthened glass |
| Frame | Black frame |
| Junction Box | IP68 |
| Connectors | Verify actual supplied connector and approved mating connector |
| Cable Cross-Section | 4mm² (IEC) |
| Standard Cable Lengths | Positive 200mm / negative 300mm, or customized |
| Operating Temperature | -40°C to 85°C / -40°F to 185°F |
| Listed Front-Side Load | 5,400Pa, subject to approved mounting configuration |
| Listed Rear-Side Load | 2,400Pa, subject to approved mounting configuration |
| Product Warranty | 15 years, subject to manufacturer terms |
| Power Output Warranty | 30 years, subject to manufacturer terms |
| Referenced Module Standards | IEC 61215 / IEC 61730 |
| Purchase Quantity | Full pallet of 36 panels |
Each panel measures approximately 69.37 × 44.65 inches and weighs 55.1 pounds. Select racking that accommodates the module dimensions, frame thickness, approved clamp locations, and site-specific wind and snow loads.
String inverters, optimizers, microinverters, and charge controllers must support the panel’s electrical characteristics. System design should account for cold-weather voltage increases and additional current from rear-side production.
This listing includes solar panels only. Racking, inverters, batteries, extension cables, and other installation materials are sold separately. Confirm the supplied connector type, cable lengths, and equipment compatibility before ordering accessories.
Each pallet contains 36 HT-SAAE 455W solar panels, providing 16,380W / 16.38kW of total front-side rated DC capacity.
This listing specifies a black frame with bifacial dual-glass construction. A black frame does not necessarily mean the entire panel has an all-black appearance.
Yes. The 455W rating measures front-side output under standard test conditions. Reflected light reaching the rear can contribute additional production. Actual gains depend on installation height, shading, spacing, and surrounding surfaces.
They can be used in residential systems when the mounting structure, electrical design, and applicable installation requirements support the module. Each panel measures approximately 69.37 × 44.65 inches.
Potentially, depending on the specific microinverter. Check its MPPT voltage range, maximum input voltage, operating current, and short-circuit current limits against the panel specifications, including temperature adjustments and bifacial current gains.
Yes, when paired with a compatible charge controller or inverter and an appropriately designed battery system. Confirm the permitted string configuration and electrical limits before installation.
Outage operation depends on the complete system. Solar panels alone do not provide home backup power. A compatible backup inverter, battery storage, and any required transfer equipment are needed for a battery-based backup system.
The listing specifies a 15-year product warranty and a 30-year power output warranty. Coverage is subject to the manufacturer’s applicable terms and installation requirements.
No. This listing includes 36 solar panels. Mounting equipment, inverters, batteries, and other installation materials are sold separately.
This listing is sold by the full pallet of 36 panels. Contact our team for help finding products with smaller minimum quantities.
HT-SAAE, also known as HT-SOLAR, manufactures photovoltaic modules for residential, commercial, and larger solar installations. Its product range includes N-type TOPCon modules with half-cut cells and bifacial dual-glass construction.
Founded in Kentucky, US Solar Supplier helps homeowners and installers source solar panels, batteries, inverters, and mounting equipment. Our team can help you compare components, select compatible equipment, and explore design and engineering services for your project.
Call 1-800-230-7004 or email sales@ussolarsupplier.com for help with this pallet, equipment compatibility, or your solar project.