Fortress Power Envy True 12kW Hybrid Inverter with 200A Pass-Through – Envy12
MPN No: ENVY-12K
Contact us for Delivery Date
Out Of Stock
5,199.00
-5%
$4,898.00
You will not be able to undo this action.

U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

MPN No: ENVY-12K
Contact us for Delivery Date
Out Of Stock
5,199.00
-5%
$4,898.00
Compatible products:
Fortress eFlex Max 5.4 kWh 51.2V Battery
Fortress Power 16kWh eBoost LFP Battery
The Fortress Power Envy True Hybrid Inverter is an all-in-one solar and battery storage inverter designed for residential energy independence, whole-home backup, and off grid power systems. Combining solar energy conversion, battery charging, generator integration, and intelligent energy management, the Envy True provides a flexible solution for homeowners who want greater control over their electricity.
With integrated MPPT solar charge controllers, AC and DC coupling capabilities, and whole-home grid pass-through, this hybrid inverter can manage power from solar panels, compatible battery storage, the utility grid, and a backup generator. Its built-in monitoring and touchscreen interface make it easy to view system performance and configure energy management settings.
The Fortress Power Envy True is designed to help keep a home's electrical system operating when utility power becomes unavailable. When connected to a properly sized and compatible battery bank, the inverter can supply stored energy to household circuits during a grid outage.
Its whole-home pass-through architecture simplifies integration with a home's electrical service, while the inverter's independent backup output supplies power within its rated capacity when operating without the grid.
Homeowners can configure their systems to prioritize essential loads, solar self-consumption, or broader household backup depending on battery capacity, electrical demand, and installation design.
The Envy True includes built-in maximum power point tracking technology to manage energy from connected solar panels. Independent MPPT inputs help accommodate solar arrays with different orientations and electrical characteristics.
Solar energy can be directed toward household consumption, compatible battery charging, or grid export where permitted. The inverter also supports AC coupling, making it suitable for certain existing solar installations that are being upgraded with battery storage.
The Envy True is designed for compatible low-voltage lithium and lead-acid battery banks, including supported Fortress Power battery storage products.
Integrated battery management settings allow the inverter to coordinate charging and discharging based on system requirements. Battery communication and operating limits depend on the specific battery model and approved configuration.
A dedicated generator input provides another source of power during extended outages or periods of limited solar production. Automatic generator start support allows appropriately configured systems to incorporate generator operation into their backup strategy.
The Envy True offers configurable operating modes for solar self-consumption, time-of-use management, peak shaving, and zero-export applications.
Homeowners and installers can monitor system performance through the integrated color touchscreen and supported remote monitoring connections. Communication interfaces support compatible battery management systems and other energy equipment.
For larger installations, parallel operation allows additional compatible Envy True inverters to be incorporated into an expanded power system.
| Specification | Details |
|---|---|
| General Information | |
| Brand | Fortress Power |
| Product Series | Envy True |
| Model / MPN | Envy12 |
| Inverter Type | Hybrid Solar and Battery Storage Inverter |
| Rated Output Power | 12kW at 240V; 10.4kW at 208V |
| Battery System Voltage | 48V DC nominal |
| Parallel Capability | Up to 10 compatible inverters |
| Solar PV Input | |
| Maximum PV Array Input Power | 21,000W |
| Maximum PV Power Delivered to Battery and AC Outputs | 18,000W |
| Number of MPPT Trackers | 3 |
| PV Strings per MPPT | 2 / 1 / 1 |
| Maximum DC Input Power per MPPT | 12,000W / 7,000W / 7,000W |
| PV DC Input Voltage Range | 100–600V DC |
| Recommended Maximum PV Voltage | 550V DC |
| Nominal PV Input Voltage | 360V DC |
| Full-Power MPPT Voltage Range | 230–500V DC |
| Maximum DC Input Current per MPPT | 25A / 15A / 15A |
| Maximum Short-Circuit Current per MPPT | 31A / 19A / 19A |
| Grid and AC Output | |
| Nominal AC Output Voltage | 120/240V AC split-phase |
| Additional AC Configurations | 120/208V and supported 208V three-phase configurations |
| Continuous AC Output at 240V | 12,000W |
| Continuous AC Output at 208V | 10,400W |
| Maximum Continuous AC Output Current | 50A at 240V |
| AC Grid Pass-Through | 200A / 48,000W at 240V |
| Generator AC Input Capacity | 21,000W |
| Nominal AC Frequency | 50/60Hz |
| Grid Operating Modes | Grid-Tied, Off-Grid, Hybrid, Zero Export |
| Backup and Off-Grid Output | |
| Continuous Backup Power at 240V | 12,000W |
| Continuous Backup Power at 208V | 10,400W |
| Backup Output Voltage | 120/240V AC |
| Backup Output Current | 50A at 240V |
| Surge Power – 10 Minutes | 14,000W |
| Surge Power – 5 Minutes | 16,000W |
| Surge Power – 500ms | 20,000W |
| Transfer Time | Less than 20ms |
| Dedicated Generator Port | 100A maximum / 90A continuous |
| Generator Auto-Start | Supported |
| Battery Specifications | |
| Compatible Battery Chemistry | Compatible Lithium and Lead-Acid Batteries |
| Nominal Battery Voltage | 48V DC |
| Battery Operating Voltage Range | 40–60V DC |
| Maximum Battery Charge Current | 250A |
| Maximum Battery Discharge Current | 250A |
| Maximum Battery Charging Power | 12,000W |
| Maximum Battery Discharging Power | 12,000W |
| Battery Communication | CAN / RS485, configuration dependent |
| Efficiency | |
| Maximum Conversion Efficiency | 97.5% |
| CEC Efficiency | 96.5% |
| MPPT Efficiency | 99.9% |
| Protection and Monitoring | |
| Anti-Islanding Protection | Integrated |
| Arc Fault Circuit Interruption | Integrated AFCI |
| DC Disconnect | Integrated |
| Surge Protection | Integrated SPD |
| Rapid Shutdown | Built-in APsmart Transmitter; compatible Tigo transmitter configurations subject to manual |
| Display | Color LCD Touchscreen |
| Communication Interfaces | RS485 / WiFi / CAN |
| Monitoring | Local and Remote Monitoring |
| Physical and Environmental Specifications | |
| Dimensions (H × W × D) | 34.2 × 20.5 × 11.2 in (870 × 520 × 285 mm) |
| Weight | 127 lb (58 kg) |
| Enclosure Rating | NEMA 4X / IP65 |
| Installation | Indoor or Outdoor |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Cooling | Fan Cooling |
| Certifications Listed on Supplied Datasheet | UL 1741, UL 1741 SB, IEEE 1547A, Rule 21, ISO-NE, FCC Part 15 Class B, HECO, CEC, LUMA |
| Manufacturer Warranty | 10 Years, subject to Fortress Power warranty terms |
Yes, the Envy True is designed for whole-home electrical integration and battery backup. However, the amount of power available during an outage is limited by the inverter's output rating, battery bank capacity, and system configuration. Large household loads may require load management or additional equipment.
No. This listing is for the hybrid inverter only. Compatible batteries, solar panels, mounting equipment, and other system components are sold separately unless specifically included in a bundle.
Yes. The Envy True supports off grid operation when paired with an appropriately configured power source and compatible battery system. It can also incorporate solar panels and a generator into the overall power system.
The inverter supports compatible lithium and lead-acid battery systems, including supported Fortress Power batteries. Exact compatibility depends on the battery model, communication protocol, firmware, and approved charging configuration.
Yes. The inverter includes a dedicated generator input and supports automatic generator start. A properly configured generator can supplement solar and battery power during extended outages or low solar production.
AC pass-through allows available utility or generator power to supply connected household loads through the inverter's transfer architecture. It does not increase the inverter's independent battery-powered output capacity.
Yes. The inverter supports AC coupling as well as direct DC solar input, making it suitable for certain existing grid-tied solar installations being expanded with energy storage. Equipment compatibility and system configuration must be verified.
Yes. The Envy True supports zero-export operating modes for systems designed to limit power export to the utility grid. Proper configuration and compatible monitoring equipment may be required.
The inverter includes an APsmart rapid shutdown transmitter. Compatible module-level rapid shutdown devices and other required equipment must be selected according to the installation manual and applicable electrical requirements.
Yes. The Envy True supports parallel operation with compatible units, allowing system designers to expand available power capacity for larger installations.