Deka Solar 12V 225Ah Deep Cycle Gel Battery, Sealed – 8G8D-HLT-DEKA
MPN No: 8G8D-HLT-DEKA
Expected ship date Nov 28 - Dec 05
In Stock
813.00
-6%
$761.81
You will not be able to undo this action.

U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

8G8D-HLT-DEKA
MPN No: 8G8D-HLT-DEKA
Expected ship date Nov 28 - Dec 05
In Stock
813.00
-6%
$761.81
12V Nominal | 225Ah at 20 Hours | 265Ah at 100 Hours | Genuine Gel Technology | HLT Terminals
The Deka Solar 8G8D 12V 225Ah Deep Cycle Gel Battery is engineered for dependable energy storage in solar photovoltaic, renewable energy, and backup power systems. Manufactured by East Penn Manufacturing, this sealed valve-regulated lead-acid (VRLA) battery features genuine gel technology, a reinforced polypropylene case, and a maintenance-free design for applications requiring frequent deep cycling.
Built for off-grid solar systems, remote power installations, water pumping, telecommunications-style monitoring applications, and renewable energy storage, the Deka 8G8D provides reliable deep-cycle performance without the routine watering required by traditional flooded lead-acid batteries.
The 8G8D-HLT-DEKA configuration features HLT terminals and a reinforced, heat-sealed enclosure designed to resist leakage and case deformation.
The Deka Solar 8G8D is designed to provide dependable stored energy for photovoltaic and renewable energy systems that require repeated discharge and recharge cycles.
Its deep-cycle construction makes it suitable for applications where batteries regularly supply electricity during periods of low solar production, overnight operation, or interruptions in the primary power source.
The Deka 8G8D uses genuine gel electrolyte technology within a sealed, valve-regulated lead-acid battery design.
Unlike conventional flooded batteries, gel batteries do not require routine electrolyte watering. Their sealed construction makes them a practical choice for remote installations and other applications where frequent maintenance is undesirable.
Gel batteries must be charged using compatible voltage and current settings. They should not be charged using unrestricted flooded-battery profiles.
The Deka Solar 8G8D provides a rated capacity of 225 amp-hours at the 20-hour discharge rate and 265 amp-hours at the 100-hour rate.
Battery capacity varies with discharge rate, operating temperature, battery age, and discharge depth.
The 2.7kWh figure is a nominal energy calculation, not a guarantee of usable energy. Actual usable capacity depends on discharge depth, system configuration, and operating conditions.
The Deka Solar gel battery is specifically designed for renewable energy and backup power applications where repeated discharge cycles are expected.
The manufacturer provides cycle-life performance information showing the relationship between depth of discharge and expected cycle life.
As with other lead-acid batteries, shallower discharge cycles generally support longer battery service life.
The Deka 8G8D uses a reinforced polypropylene container designed to resist bulging and support long-term battery durability.
Its case and cover are heat-sealed and tested to help prevent leakage, while the internal lead-calcium alloy plates are designed for dependable rechargeable battery performance.
Correct charging is essential for maintaining gel battery performance and service life.
The manufacturer publishes the following photovoltaic charging parameters for the Deka Solar 8G8D battery family.
| Charging Parameter | Manufacturer Specification |
|---|---|
| Bulk Charge Maximum Current | 30% of the 20-Hour Ah Rating |
| Calculated Bulk Current Limit | 67.5A |
| Absorption Voltage | 2.35–2.40V per Cell |
| 12V Absorption Voltage | 14.10–14.40V |
| Float Voltage | 2.24–2.26V per Cell |
| 12V Float Voltage | 13.44–13.56V |
| Equalize Voltage | 2.40–2.43V per Cell |
| 12V Equalize Voltage | 14.40–14.58V |
| Published Temperature Coefficient | 0.003V/°C |
Important: The manufacturer lists an equalize-charge voltage, but this should not be interpreted as approval to use automatic flooded-battery equalization routines. Follow the manufacturer's complete charging instructions and use a charge controller specifically configured for this gel battery.
This product uses the 8G8D-HLT-DEKA terminal configuration.
The HLT variant has a published overall height of 11.25 inches and a maximum terminal tightening torque of 50 in-lb (5.7Nm).
Other 8G8D variants use different terminal styles and overall heights. Confirm that the HLT terminal arrangement is appropriate for the intended battery cables, enclosure, and installation.
| Specification | Details |
|---|---|
| Brand | Deka Solar |
| Manufacturer | East Penn Manufacturing |
| Battery Model | 8G8D |
| MPN | 8G8D-HLT-DEKA |
| Battery Type | Sealed VRLA Gel Lead-Acid |
| Application | Deep-Cycle Solar and Renewable Energy Storage |
| Nominal Voltage | 12V |
| 20-Hour Capacity | 225Ah |
| 100-Hour Capacity | 265Ah |
| Nominal Energy Calculation | 2.7kWh at 12V × 225Ah |
| Published Discharge Endpoint | 1.75V per Cell |
| Published Short-Circuit Current | 5,915A |
| Positive Plate Material | Pure Lead-Calcium Alloy |
| Negative Plate Material | Pure Lead-Calcium Alloy |
| Container Material | Polypropylene |
| Safety Vent | Low-Pressure, Self-Sealing |
| Terminal Type | HLT |
| Maximum Terminal Torque | 50 in-lb / 5.7Nm |
| Length | 20.44 in / 519mm |
| Width | 10.97 in / 279mm |
| Overall Height | 11.25 in / 286mm |
| Height to Terminal | 11.25 in / 286mm |
| Approximate Weight | 157 lbs / 71kg |
| Bulk Charge Current Limit | 30% of 20-Hour Rating (67.5A) |
| Absorption Voltage | 14.10–14.40V for 12V Battery |
| Float Voltage | 13.44–13.56V for 12V Battery |
| Published Equalize Voltage | 14.40–14.58V for 12V Battery |
| Transportation Classification | Non-Spillable per Manufacturer's Referenced DOT / ICAO / IATA Definitions |
| Routine Watering | Not Required |
The Deka Solar 8G8D is designed for renewable energy and backup power applications requiring reliable rechargeable energy storage.
The Deka Solar 8G8D is a 12V battery and can be used in appropriately designed battery banks for compatible solar charge controllers and inverter systems.
Note: This is a 12V deep-cycle battery, not a complete solar battery backup system. Inverters, charge controllers, battery cables, protective equipment, and other system components are selected separately.
It is a sealed, valve-regulated lead-acid battery that uses genuine gel electrolyte technology and is designed for deep-cycle renewable energy applications.
The Deka 8G8D has a nominal voltage of 12V.
The battery is rated at 225Ah at the 20-hour discharge rate and 265Ah at the 100-hour discharge rate.
Using its nominal voltage and 20-hour capacity, the battery has a calculated nominal energy value of approximately 2.7kWh. Actual usable energy depends on depth of discharge, load, temperature, and battery condition.
Yes. The manufacturer specifically designs the Deka Solar gel battery for renewable energy applications where frequent deep cycling is required.
No. This model uses gel electrolyte technology. Gel and AGM are different types of sealed VRLA lead-acid batteries and may require different charging settings.
The sealed gel design does not require routine electrolyte watering. Periodic inspection of terminals, cables, connections, and charging equipment is still recommended.
Yes. The Deka Solar 8G8D is designed for compatible photovoltaic and renewable energy storage applications, including off-grid installations.
Yes, when the inverter system is designed for the appropriate battery voltage and supports gel lead-acid battery operation. Compatibility must be verified for the specific equipment.
Multiple batteries may be used in a properly engineered battery bank, subject to the manufacturer's installation guidance and the voltage and capacity requirements of the connected equipment.
The manufacturer specifies a maximum bulk charging current equal to 30% of the 20-hour capacity, which calculates to 67.5A for this 225Ah battery.
The manufacturer's published absorption range is 2.35–2.40V per cell, equivalent to 14.10–14.40V for a six-cell 12V battery. Follow the complete manufacturer charging guidance and applicable temperature compensation.
The published float range is 2.24–2.26V per cell, equivalent to 13.44–13.56V for a 12V battery.
Do not apply a generic flooded lead-acid equalization program. Although the datasheet publishes an equalize voltage range, any equalization procedure should follow the manufacturer's specific instructions for this gel battery.
The 8G8D-HLT-DEKA uses the manufacturer's HLT terminal configuration, with a maximum tightening torque of 50 in-lb (5.7Nm).
The battery measures approximately 20.44 inches long, 10.97 inches wide, and 11.25 inches high overall.
The manufacturer's published approximate weight is 157 lbs (71kg).
The manufacturer identifies this configuration as non-spillable under referenced transportation definitions. Proper handling, packaging, and shipping requirements still apply.
Depth of discharge, charging practices, operating temperature, and system loading all affect battery service life. The manufacturer provides a cycle-life-versus-depth-of-discharge chart for the Deka Solar gel battery family.
Yes. Solar water pumping is one of the applications specifically identified by the manufacturer.