Bluetti Pioneer Na (Sodium) Portable Power Station 1,500W | 900Wh
MPN No: Pioneer Na Battery
Expected ship date Sep 24 - 27
In Stock
879.00
-9%
$799.00
You will not be able to undo this action.

U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

Pioneer Na Battery
MPN No: Pioneer Na Battery
Expected ship date Sep 24 - 27
In Stock
879.00
-9%
$799.00
1,500W continuous output, 900Wh capacity and dependable operation in extreme cold
The BLUETTI Pioneer Na is designed for the situations where ordinary portable batteries are most likely to struggle. Its sodium-ion battery can charge at temperatures down to 5°F and discharge down to -13°F, making it a strong fit for winter outages, cold garages, ice fishing, snow camping, remote work and emergency use in northern climates.
It delivers 1,500W of continuous AC output from a compact 35.3 lb unit, with enough connections for appliances, electronics and 12V equipment. Fast charging, low standby consumption and more than 4,000 rated cycles also make it practical as a year-round backup power station, not just a specialty winter product.
The 2,250W Power Lifting rating is not the continuous inverter rating. It is intended for compatible resistive heating loads. Equipment with compressors, pumps or motors must be sized using its actual running watts and startup surge.

The battery can recharge at temperatures as low as 5°F and provide power down to -13°F. At -13°F, BLUETTI states that the unit retains about 80% of its discharge capacity.
The 1,500W pure sine wave inverter can run many refrigerators, televisions, computers, lights, fans, CPAP machines and smaller tools, as long as total demand remains within the unit’s limits.
AC charging reaches up to 1,400W. When AC and compatible solar are used together, total input can reach 1,900W for an 80% recharge in about 35 minutes and a full charge in about 52 minutes under BLUETTI test conditions.
With its outputs off, the Pioneer Na uses about 1.5W at no load. That helps preserve more stored energy when the unit is waiting for an outage or used intermittently.
The sodium-ion battery is rated for more than 4,000 charge cycles and an expected service life of up to 10 years under the manufacturer’s stated conditions.
Four AC outlets, USB-C, four USB-A ports, a regulated 12V car outlet and a wireless charging pad cover most short-outage, camping and mobile-work needs.
Sodium-ion is not automatically the better choice for every buyer. The Pioneer Na makes the most sense when low-temperature charging and cold-weather availability matter more than maximum capacity or battery expansion. A conventional LiFePO4 station may offer more model choices and larger expandable systems, but many LFP batteries restrict charging near or below freezing.
The Pioneer Na’s advantage is straightforward: it can accept a charge and continue operating in temperatures that often require a lithium power station to warm up or shut down charging. For normal indoor use, compare capacity, output, ports and price just as you would with any other portable power station.
Solar panels are not included with this standalone listing. The solar charging cable is included, but the connected array must remain within the Pioneer Na’s 12–60V DC, 10A and 500W input limits.
The Pioneer Na can supply up to 1,500W continuously across all AC outlets combined. It is a good match for essential electronics and selected household appliances, but 900Wh is intended for targeted backup rather than running an entire home.
| Example Load | Assumed Power Draw | Estimated Runtime |
|---|---|---|
| Wi-Fi router | 20W | Approximately 38 hours |
| CPAP machine | 50W | Approximately 15 hours |
| Laptop | 60W | Approximately 12.8 hours |
| Full-size refrigerator | 150W average | Approximately 5.1 hours |
| Large television | 200W | Approximately 3.8 hours |
| Continuous medium load | 500W | Approximately 1.5 hours |
| Continuous heavy load | 1,000W | Approximately 46 minutes |
Runtime estimates use 85% of the 900Wh nominal battery capacity. Actual results vary with inverter overhead, temperature, battery condition, cycling loads, appliance efficiency and startup demand. Refrigerator runtime is based on average consumption, not compressor nameplate wattage.
| Specification | Details |
|---|---|
| Manufacturer | BLUETTI |
| Model | Pioneer Na |
| Battery Chemistry | Sodium-ion |
| Battery Capacity | 900Wh |
| Cycle Life | 4,000+ cycles |
| Expected Battery Life | Up to 10 years under manufacturer-stated conditions |
| Continuous AC Output | 1,500W pure sine wave |
| Power Lifting Mode | Up to 2,250W for compatible resistive loads |
| AC Outlets | 4 × 120V outlets; 1,500W total |
| USB-C | 1 × 100W maximum |
| USB-A | 4 × 15W maximum |
| Wireless Charging | 1 × 15W maximum |
| 12V Car Outlet | 1 × regulated 12V/10A |
| AC Charging Input | Up to 1,400W |
| Solar Input | Up to 500W; 12–60V DC, 10A maximum |
| Combined AC + Solar Input | Up to 1,900W |
| Fast-Charge Time | Approximately 35 minutes to 80% and 52 minutes to full with 1,900W combined input at 50°F to 77°F |
| AC-Only Charge Time | Approximately 45 minutes to 80% at 59°F to 77°F |
| UPS Transfer Time | Approximately 20ms |
| Connectivity | Bluetooth |
| Charging Temperature | 5°F to 104°F (-15°C to 40°C) |
| Discharging Temperature | -13°F to 104°F (-25°C to 40°C) |
| Weight | 35.3 lb (16 kg) |
| Dimensions | 13.4 × 9.7 × 12.5 in (340 × 247 × 317 mm) |
| Warranty | 3 years |
Specifications are based on current manufacturer information and may be revised without notice. Review the supplied manual before connecting appliances, solar panels or charging sources.
The strongest reason is cold-weather charging. The Pioneer Na can recharge down to 5°F and discharge down to -13°F. Many LiFePO4 power stations restrict charging around freezing unless they have battery heating. Sodium-ion is not automatically better in every other category, so capacity, output and expansion needs should still be compared.
Yes. BLUETTI rates charging down to 5°F. When the battery is below 14°F, charging may be limited to about 60% state of charge. Charging speed also decreases as the battery gets colder.
BLUETTI states that the Pioneer Na retains approximately 80% of its discharge capacity at -13°F and can still supply loads up to its rated 1,500W output. Actual runtime will vary with the load and battery temperature.
Usually, provided the appliance’s running and startup wattage remain within the Pioneer Na’s limits. A refrigerator averaging 150W may run for about five hours using an 85% capacity assumption, but actual runtime varies because compressors cycle on and off.
Power Lifting allows the unit to operate certain resistive heating appliances rated up to 2,250W by managing output voltage. It is not a 2,250W continuous inverter rating and is not intended to cover every motor, compressor or electronic load.
No. The four AC outlets share one 1,500W continuous output limit. Add the running wattage of everything connected at the same time.
It requires up to 1,400W of AC input and up to 500W of solar input at the same time. BLUETTI’s 35-minute estimate is for charging to 80% with the battery between 50°F and 77°F. AC charging alone reaches 80% in approximately 45 minutes under stated conditions.
No. This standalone listing includes the solar charging cable but not a solar panel. The panel or array must stay within 12–60V DC, 10A and 500W.
No compatible external battery expansion is listed for the Pioneer Na. Its system capacity is fixed at 900Wh. Buyers needing substantially longer runtime should consider a larger or expandable BLUETTI system.
Yes. The Pioneer Na supports approximately 20ms UPS transfer. That is suitable for many household electronics and appliances, but equipment requiring true zero-interruption power should be checked against the manufacturer’s tolerance.
This product is designed primarily for plug-in loads. Do not connect it directly to household wiring. Any panel connection requires approved transfer equipment, proper circuit design and a qualified installer.
No weatherproof IP rating is published for this model. Keep it dry, allow proper ventilation and protect all cables and connections from rain, snow and standing water.
The current manufacturer specification lists Bluetooth connectivity. It does not list Wi-Fi connectivity for remote monitoring away from the unit.
The unit has low no-load consumption, but it should still be stored according to BLUETTI’s state-of-charge and temperature guidance. Check and recharge it periodically so it is ready when needed.
BLUETTI lists a three-year limited manufacturer warranty for the Pioneer Na. Keep your proof of purchase and register the product if required by the current warranty terms.
BLUETTI develops portable power stations, battery storage systems, solar charging equipment and backup-power accessories for homes, RVs, work sites and off-grid use. The Pioneer Na brings sodium-ion technology into a compact consumer power station built specifically for dependable cold-weather operation.
US Solar Supplier is an American-founded company based in Kentucky. We offer equipment from established power and energy-storage manufacturers, along with practical support before and after the sale.
Need help confirming appliance loads, expected runtime or solar compatibility? Call 1-800-230-7004 and our team will help you review the product before you order.