Magnum MS4448PAE 4400W 48V Pure Sine Wave Inverter/Charger ā MS4448PAE
MPN No: MS4448PAE
Expected ship date Nov 07 - 14
In Stock
$2,087.00
You will not be able to undo this action.

U.S. Warehouse
Trusted by Thousands
Expert U.S. Support

MS4448PAE
MPN No: MS4448PAE
Expected ship date Nov 07 - 14
In Stock
$2,087.00
The Magnum Energy MS4448PAE Pure Sine Wave Inverter/Charger provides dependable battery-based AC power for off-grid solar installations, renewable energy systems, and residential backup power applications. Part of Magnum Energy's MS-PAE Series, this low-frequency inverter/charger combines clean AC power conversion, intelligent battery charging, and automatic AC source transfer in a single unit.
Designed for demanding power applications, the MS4448PAE supplies split-phase AC output suitable for compatible household electrical loads. Its pure sine wave technology supports sensitive electronics, appliances, and equipment requiring stable AC power.
When an external AC source such as a generator is available, the integrated charger can replenish the connected battery bank while the transfer system manages the transition between inverter and external power.
The Magnum MS4448PAE is designed for installations where stored battery energy must be converted into dependable AC power. It can serve as the primary inverter in an off-grid system or as part of a properly designed backup power arrangement.
In solar applications, energy from the panels is managed by a separate compatible solar charge controller before being stored in the battery bank. The inverter then converts that stored energy into usable AC electricity.
This battery-based architecture offers flexibility for cabins, remote properties, residential backup systems, and renewable energy installations that combine multiple power sources.
The MS4448PAE produces pure sine wave electricity, making it suitable for a broad range of compatible electrical devices, including household appliances, electronic equipment, and motor-driven loads.
Its split-phase output allows the inverter to support compatible residential distribution arrangements without requiring a separate transformer to create split-phase power.
The inverter's short-duration surge capability also helps accommodate startup demands that temporarily exceed normal operating consumption.
In addition to supplying inverter power, the MS4448PAE includes an AC-powered battery charger. When a suitable external AC source is connected, the unit can charge the battery bank using its built-in multi-stage charging system.
The charging process includes bulk, absorption, float, equalization when appropriately configured, and Battery Saver functionality.
Its integrated transfer relays manage the transition between available external AC power and inverter-supplied electricity. This helps simplify systems that combine batteries with generator or utility input.
Battery charging profiles must be configured for the specific battery manufacturer's requirements. Compatibility with lithium batteries or battery management systems should be verified before use.
The MS-PAE Series supports compatible parallel inverter configurations, making the MS4448PAE an option for installations that may require additional power capacity.
Magnum remote controls such as the ME-RC, ME-ARC, and ME-RTR provide access to operating functions and system settings, depending on the configuration.
Optional automatic generator start and monitoring accessories can further extend system functionality. These accessories are separate unless specifically included in a configured package.
| Specification | Details |
|---|---|
| General Specifications | |
| Brand | Magnum Energy |
| Series | MS-PAE |
| Model / MPN | MS4448PAE |
| Product Type | Battery-based inverter/charger |
| Inverter Topology | Low-frequency transformer |
| Output Waveform | Pure sine wave |
| Phase | Single-phase, split-phase output |
| Inverter Specifications | |
| Continuous AC Output | 4,400 VA at 25°C |
| Nominal Battery Voltage | 48V DC |
| Battery Input Voltage Range | 36ā64V DC |
| Nominal AC Output | 120/240V AC split phase |
| AC Output Voltage Accuracy | ±5% |
| Output Frequency | 60Hz ±0.1Hz |
| Total Harmonic Distortion | Less than 5% |
| Continuous Output Current at 240V | 18.3A |
| Continuous Output Current at 120V | 29.7A line-to-neutral, subject to leg imbalance limits |
| Surge Power, 5 Seconds | 8,500W |
| Surge Power, 30 Seconds | 6,000W |
| Surge Power, 5 Minutes | 5,400W |
| Peak Inverter Efficiency | 94% |
| Typical No-Load Consumption | 25W |
| Typical Search Mode Consumption | Less than 6W |
| Transfer Time | 16 milliseconds |
| Battery Charger Specifications | |
| Charger Type | Multi-stage AC-to-DC battery charger |
| Maximum Continuous Charging Output | 60A DC at 25°C |
| Charger Efficiency | 85% |
| Charger Power Factor | Greater than 0.95 |
| AC Charger Input | 120/240V AC split phase |
| AC Input Current at Rated Charging Output | 17.5A per leg |
| Charging Stages | Bulk, Absorb, Float, Equalize (remote required), Battery Saver |
| System and Protection Features | |
| AC Transfer Relays | Two legs, 30A per leg |
| Parallel Configuration | Up to four compatible identical MS-PAE inverters with appropriate Magnum system equipment |
| Compatible Remote Controls | ME-RC, ME-ARC, ME-RTR |
| Generator Start | Optional accessory |
| Battery Temperature Compensation | Supported; battery temperature sensor |
| Protections | Overcurrent and overtemperature protection |
| Certification | ETL listed to ANSI/UL 1741, 1st Edition, and CSA C22.2 No. 107.1-01 per published series datasheet |
| Physical and Environmental Specifications | |
| Dimensions | 13.75 Ć 12.65 Ć 8.0 inches |
| Weight | 55 lbs (24.9 kg) |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Operating Humidity | 0ā95% RH, non-condensing |
| Maximum Operating Altitude | 15,000 ft (4,570 m) |
| Mounting Options | Shelf, wall, compatible MP/MMP panels |
| Published Warranty | 3 years parts and labor; 5 years when installed on qualifying MP/MMP systems, subject to manufacturer terms |
Yes. The MS4448PAE is a battery-based inverter/charger commonly used in off-grid renewable energy systems and compatible backup power installations. It is not a conventional grid-tied solar string inverter.
Yes. It provides split-phase AC output suitable for compatible residential loads and distribution systems.
Yes. The integrated multi-stage charger uses an external AC source, such as a compatible generator or utility connection, to recharge the connected battery bank.
No. The inverter does not include an integrated solar MPPT charge controller. Solar panels require a separate compatible solar charge controller and battery bank.
No. This is a battery-based inverter/charger that requires a compatible DC battery system for inverter operation.
Compatibility depends on the battery manufacturer's approved inverter list, required charging settings, and battery management system. Lithium compatibility should not be assumed without confirming the specific battery model and system configuration.
Yes. The MS-PAE platform supports compatible parallel inverter configurations using the required Magnum system equipment and controls.
Yes. A compatible generator can provide external AC input for supplying loads and charging the connected battery bank. Optional Magnum accessories can add automatic generator-start functionality.
Magnum remote panels are supported accessories, but inclusion depends on the specific product package. Confirm package contents before purchasing.
It combines battery inversion, AC charging, and AC transfer functions, but does not include an integrated solar charge controller or standard grid-export functionality. It is more accurately categorized as an off-grid or battery-based inverter/charger.